LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.4L V6 - VIN (E) (On-Vehicle) >> Repair Instructions >> Engine Oil Level Sensor And/Or Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the oil level sensor.
  2. Install the oil level sensor bolt. Tighten the bolt to 9 N.m (80 in lbs).
  3. Connect the oil level sensor electrical connector.
  4. Install the engine oil drain plug. Tighten the plug to 30 N.m (22 ft lbs).
  5. Lower the vehicle.
  6. Fill the crankcase with engine oil.
scientia non olet · About LEMON Manuals