LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.4L V6 - VIN (E) (On-Vehicle) >> Repair Instructions >> Engine Mount Strut Bracket Replacement - Upper Radiator Support >> Installation Procedure

Installation Procedure

  1. Position the engine mount strut bracket over the upper radiator support. Make sure that the engine mount strut bracket and the engine mount strut are aligned to the proper holes of the upper radiator support.
  2. Install the vertical bolts (2) to the engine mount strut bracket. Tighten the engine mount strut bracket bolts to 28 N.m (21 ft lbs).
  3. Install the horizontal bolt (1) to the engine mount strut bracket. Tighten the engine mount strut bracket bolt to 28 N.m (21 ft lbs).
  4. Install the engine mount strut to the engine mount strut bracket at the upper radiator support.
scientia non olet · About LEMON Manuals