LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.4L V6 - VIN (E) (On-Vehicle) >> Repair Instructions >> Camshaft Rear Bearing Hole Plug - Replacement >> Installation Procedure

Installation Procedure

  1. Coat the camshaft rear bearing hole plug with sealer GM P/N 12377901 or equivalent.
  2. Install the camshaft rear bearing hole plug.
  3. Ensure that the camshaft rear bearing plug is installed to specifications.
  4. Install the engine flywheel.
scientia non olet · About LEMON Manuals