LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Pedal Assembly >> Installation

Brake Pedal Assembly: Installation

  1. Install the brake pedal assembly.
  2. Install the upper and the lower mounting nuts to the brake pedal assembly. Tighten the mounting nuts to specification. See TORQUE SPECIFICATIONS  .
  3. Connect the brake pedal pushrod to the brake pedal. Connect the electrical harness to the brake pedal.
  4. Install the brake switch to the brake pedal. Connect the accelerator cable to the accelerator pedal. Install the left instrument panel insulator.
scientia non olet · About LEMON Manuals