LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Overhaul >> Drum Brake Components >> Adjusting Hardware Removal

Adjusting Hardware Removal

  1. Raise and support the vehicle. Remove the rear tire and wheel assembly.
  2. Remove the brake drum and shoes. See REAR BRAKE DRUM  and REAR BRAKE SHOES  under REMOVAL & INSTALLATION.
  3. Remove the adjuster spring. Remove the adjuster actuator lever. See Figure .
scientia non olet · About LEMON Manuals