Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Caliper Bore Diameter

2.36 (60.0)

Disc Diameter

10.94 (278.0)

Original Thickness

1.03 (26.2)

Minimum Refinish Thickness ⁽¹⁾

.980 (25.0)

Discard Thickness ⁽²⁾

.970 (25.0)

Lateral Runout

.0015 (.04)

Thickness Variation

.001 (.025)

⁽¹⁾	Manufacturer does not recommend resurfacing rotors when replacing brake pads. Resurface rotors only when there is a brake pulsation complaint or scoring greater than .060" (1.5 mm).

⁽²⁾	Use specification stamped on rotor (if available).