LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cluster trim plate. Refer to Trim Panel Replacement - IP Cluster .
  2. Remove the screws attaching the IP cluster (2) to the IP carrier (1).
  3. Pull the IP cluster (2) rearward in order to remove the cluster from IP carrier.
  4. Disconnect the electrical connector.
    Fig 1: Removing IPC
    G01779901Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals