LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Cupholder Replacement >> Installation Procedure

Installation Procedure

  1. Install the IP cupholder to the IP carrier.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the IP cup holder screws to the IP cup holder.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  3. Install the screw to the side of the IP cupholder.

    Tighten 

    Tighten the screw to 2 N.m (18 lb in).

  4. Install the driver side IP outer trim cover.
    Fig 1: Installing Cupholder
    G01779904Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals