LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Installation Procedure

Installation Procedure

CAUTION: Refer to FASTENER NOTICE .
  1. Install the right halve of the sound insulator on the drivers side to the IP carrier, and install the bolts to the sound insulator.

    Tighten 

    Tighten the bolts to 2 N.m (18 lb in).

  2. Install the left halve of the sound insulator on the drivers side to the IP carrier and install the push pin.
    Fig 1: Installing Closeout Insulator Panel
    G01779880Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals