Removal Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bolt and the nut from the engine mount strut at the left engine mount strut bracket on the engine.
- Remove the bolt, the nut, and the engine wiring harness retainer from the engine mount strut at the engine mount strut bracket on the upper radiator support.
- Remove the engine mount strut.
- Inspect the rubber in the engine mount strut for the following conditions:
- Hardness
- Splitting
- Cracking