LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Engine Mechanical - 3.4L V6 - VIN (E) (La1)) >> Repair Instructions >> On-Vehicle Repair instructions >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic transaxle. Refer to TRANSAXLE .
  2. Use the J 37096  to secure the flywheel in order to prevent rotation. See Special Tools .
    3. Fig 1: Identifying Engine Flywheel & Components
    GM54396Courtesy of GENERAL MOTORS CORP.
  3. Loosen the 6 engine flywheel bolts.
  4. Remove 5 of the 6 flywheel bolts leaving 1 bolt at the top of the crankshaft rotation.
  5. Grip the flywheel and remove the remaining bolt. Do not drop the flywheel when removing the final bolt.
  6. Remove the engine flywheel retainer and the flywheel.
  7. Clean the engine flywheel bolt threads and bolt holes.
scientia non olet · About LEMON Manuals