Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Install the flywheel and the flywheel retainer.
- Install the flywheel bolts. Use the J 37096
to prevent flywheel rotation. See Special Tools .
Tighten: Tighten the bolts to 71 N.m (52 lb ft).
- Install the automatic transaxle. Refer to TRANSAXLE .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.