Test O: Odometer Trip/Reset Switch Inoperative
- Perform instrument panel cluster system diagnostic system check. See INSTRUMENT PANEL CLUSTER SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. If instrument panel cluster system diagnostic system check has been performed, go to next step.
- Turn ignition switch to RUN position. Press odometer trip/reset switch. If odometer toggles between trip and season, check for intermittent problem. See DIAGNOSING INTERMITTENTS . Repair or replace as necessary. After repair, go to step 4 . If odometer does not toggle between trip and season, go to next step.
- Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC) under REMOVAL & INSTALLATION and go to next step.
- Check odometer trip/reset switch operation. If switch operates normally, repair is complete. If problem still exists, return to step 2 .