Brake Fluid Loss
- Were you sent here from the Hydraulic Brake Symptom table? If so, go to next step. If not, see DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKES under TROUBLE SHOOTING.
- Inspect the hydraulic brake system for proper operation. See HYDRAULIC BRAKES SYSTEM TESTING under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 6 . If not, go to next step.
- Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM TESTING under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 6 . If not, go to next step.
- Separate the master cylinder from the power brake booster. Do not disconnect any brake pipes. See MASTER CYLINDER under REMOVAL & INSTALLATION. Inspect the rear of the master cylinder for a brake fluid leak. Inspect for brake fluid in the power brake booster. Did you find a brake fluid leak? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKES .
- Replace the brake master cylinder and the power brake booster. See MASTER CYLINDER and POWER BRAKE BOOSTER under REMOVAL & INSTALLATION. After repairs are complete, go to next step.
- Install or connect components that were removed or disconnected during diagnosis. Road test the vehicle to confirm proper operation. See BRAKE SYSTEM VEHICLE ROAD TEST . Is the condition still present? If so, go to step 2 . If not, system is okay.