LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Rotors >> Removal (Rear)

Removal (Rear)

  1. Raise and suitably support the vehicle. Remove the tire and wheel assembly.
  2. Remove and support the caliper and bracket as an assembly with heavy mechanics wire. DO NOT disconnect the hydraulic flexible brake hose. See BRAKE CALIPERS  . Remove the brake rotor.
  3. If the brake rotor is to be reinstalled to the vehicle, use the Rotor/Drum Flange Resurfacing Kit in order to clean any rust or corrosion from the hub/axle flange mating surface of the brake rotor. Use the Wheel Hub/Flange Resurfacing Kit in order to clean the wheel hub flange.
scientia non olet · About LEMON Manuals