LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Caliper Brackets >> Installation

Brake Caliper Brackets: Installation

  1. Clean and visually inspect threads of the caliper bracket bolts and mounting holes in the knuckle. Apply Threadlocker, GM P/N 12345493 (Canadian P/N 10953488) or equivalent, to the threads of the brake caliper bracket bolts.
  2. Install the caliper bracket with the bracket bolts. See Figure . Tighten to specification. See TORQUE SPECIFICATIONS  . Install the front brake pads. Install the caliper. See FRONT BRAKE CALIPER  .


  1. Clean and visually inspect threads of the caliper bracket bolts and mounting holes in the knuckle. Apply Threadlocker, GM P/N 12345493 (Canadian P/N 10953488), or equivalent to the threads of the brake caliper bracket bolts.
  2. Install the caliper bracket with the bracket bolts. Tighten to specification. See TORQUE SPECIFICATIONS  . Install the rear brake pads. Install the caliper. See BRAKE CALIPERS  .
scientia non olet · About LEMON Manuals