DTC B0931: Compass Sensor Circuit Malfunction: Testing
- Perform driver information center system diagnostic system check. See DRIVER INFORMATION CENTER SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. If driver information center system diagnostic system check has been performed, go to next step.
- If vehicle is equipped with sun roof, go to next step. If vehicle is not equipped with sun roof, go to step 4 .
- Disconnect DIC Black 9-pin connector C1. Check for poor connection at DIC Black 9-pin harness connector C1. Repair as necessary and go to step 5 . If connection is okay, go to next step.
- Replace DIC and calibrate compass. See DRIVER INFORMATION CENTER (DIC) under REMOVAL & INSTALLATION. Go to next step.
- Using scan tool, clear DTCs. Operate vehicle within CODE ENABLE CRITERIA conditions. Using scan tool, retrieve DTCs. If DTC B0931 resets, return to step 2 . If DTC B0931 does not reset, system is okay.