LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Analog Instrument Panels >> System Tests >> Test T: Change Oil Indicator Inoperative

Test T: Change Oil Indicator Inoperative

  1. If IPC diagnostic system check was performed, go to next step. If IPC diagnostic system check was not performed, go to INSTRUMENT PANEL CLUSTER DIAGNOSTIC SYSTEM CHECK  . After performing IPC diagnostic system check, go to next step.
  2. Turn ignition on. Using scan tool, select PCM 3 data list and monitor ENGINE OIL LIFE PERCENT. If scan tool displays zero percent with change engine oil message inoperative, go to next step. If scan tool does not display zero percent with change engine oil message inoperative, system is okay at this time.
  3. Replace IPC. See INSTRUMENT PANEL CLUSTER  . After repairs, go to next step.
  4. Recheck system operation to verify the repair. If system operates properly, repair is complete. If system does not operate properly, go to step  2 .
scientia non olet · About LEMON Manuals