LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Chevy Express G1500, Van Cargo, 4.3 W >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Reservoir >> Installation

Master Cylinder Reservoir: Installation

  1. Lubricate the new O-rings and the reservoir-to-housing fittings with clean brake fluid. Insert the O-rings into the grooves in the reservoir. Make sure that the O-rings are properly seated.
  2. Install the reservoir to the master cylinder body. Use your hand in order to press the reservoir straight down into the body. Install the diaphragm. See Figure . Install the cover.
  3. Install the master cylinder.
scientia non olet · About LEMON Manuals