Installation (Rear Hoses)
- Install the rear brake hose to the vehicle. Connect the rear brake pipes on the axle to the brake hose. Tighten the rear brake pipes to the brake hose to specification. See TORQUE SPECIFICATIONS .
- Install the retaining bolt of the rear brake hose to the rear axle. Tighten the retaining bolt of the rear brake hose to specification. See TORQUE SPECIFICATIONS .
- Install the retaining nut and retaining clip to the front of the rear brake hose. Connect the rear brake pipe to the brake hose. Bleed the brake hydraulic system. See BLEEDING, FILLING & FLUSHING BRAKE SYSTEM .