Brake Caliper: Removal
- Remove two-thirds of the brake fluid from the brake master cylinder.
- Raise and support the vehicle with suitable safety stands. Remove the tire and the wheel.
- Compress the front brake caliper piston using a C-clamp or pliers over the top of the front brake caliper housing and against the inboard front brake pad.
- Remove the front brake hose from the front brake caliper. See BRAKE HOSES
. Plug the front brake line to prevent contamination of the brake fluid.
- Remove the front brake caliper bolts.
- Remove the front brake caliper from the front brake rotor. Remove the front brake caliper from the vehicle.
- Inspect the front caliper bolts for corrosion. Replace any corroded parts. Inspect the caliper bolt bushings for nicks, cuts, or corrosion. Replace any damaged parts.
Courtesy of GENERAL MOTORS CORP.