LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Chevy Express G1500, Van Cargo, 4.3 W >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Vehicle Speed Sensor (VSS) Module Replacement >> Installation Procedure

Installation Procedure

  1. Install the vehicle speed sensor (VSS) buffer module (1) to the vehicle.
  2. Connect the electrical connector (2) the VSS buffer module (1).
  3. Position the VSS buffer module (1) to the instrument panel carrier.
  4. Install the VSS buffer module fasteners (3) that retain the VSS buffer module (1) to the instrument panel carrier.
    Fig 1: Installing Vehicle Speed Sensor (VSS) Components
    G01736555Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals