LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Chevy Express G1500, Van Cargo, 4.3 W >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Multifunction Alarm Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel driver knee bolster panel. Refer to Trim Panel Replacement - Knee Bolster .
  2. Disconnect the multi-function audio alarm module (2) from the retainer on the left inside knee bolster bracket (4).
  3. Disconnect the electrical connector (3) from the multi-function audio alarm module (2).
  4. Remove the multi-function audio alarm module (2) from the vehicle.
    Fig 1: Disconnecting & Removing Multi-Function Audio Alarm Module
    G01736558Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals