LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Chevy Express G1500, Van Cargo, 4.3 W >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement - Left >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel driver knee bolster panel. Refer to Trim Panel Replacement - Knee Bolster .
  2. Remove the screws that retain the relay center bracket to the instrument panel driver knee bolster inner and outer brackets.
  3. Remove the relay center bracket from the instrument panel driver knee bolster inner and outer brackets.
  4. Remove the nuts that retain the instrument panel driver knee bolster deflector assembly and the driver knee bolster inner and outer brackets to the instrument panel carrier.
  5. Remove the instrument panel driver knee bolster deflector assembly and the driver knee bolster inner and outer brackets from the vehicle.
    Fig 1: Removing Left Knee Bolster
    G01736568Courtesy of GENERAL MOTORS CORP.