LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Chevy Express G1500, Van Cargo, 4.3 W >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Fuel Sender Buffer Module Replacement >> Installation Procedure

Installation Procedure

  1. Position the fuel sender buffer module (2) to the vehicle.
  2. Connect the electrical connector (3) to the fuel sender buffer module.
  3. Install the fuel sender buffer module to the instrument panel passenger knee bolster inner bracket (4).
  4. Install the instrument panel passenger knee bolster. Refer to Knee Bolster Replacement - Right .
    Fig 1: Installing Fuel Sender Buffer Module Components
    G01736557Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals