LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> C3500 HD 8.1 G, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 8.1L >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (Chassis - Fuel Tank) >> Rear Chassis EVAP Pipe Installation Procedure

Rear Chassis EVAP Pipe Installation Procedure

  1. Position the EVAP pipe for installation.
  2. Secure the EVAP pipe to the chassis retainers.
  3. Install the fuel tank. Refer to the appropriate procedure in Fuel Tank Replacement (Side)  or Fuel Tank Replacement (Rear) .
  4. Install the EVAP pipe connector hose (3) from the front EVAP pipe to the chassis EVAP pipe.
  5. Secure the hose clamp.
    Fig 1: Fuel Tank Vapor Pipe, EVAP Pipe Retaining Clips & Hose Clamp
    G01598994Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals