VSS Buffer Module: Installation

WARNING: This page is about a different car, the 2002 GMC Cab & Chassis Sierra and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the vehicle speed sensor (VSS) module (2) to the vehicle. See Fig 1 .
Connect the electrical connector (3) to the VSS module (2).
Position the VSS module (2) to the instrument panel carrier retaining tabs (1).
Install the storage compartment.

Fig 1: Removing & Installing VSS Control Module

Courtesy of GENERAL MOTORS CORP.