LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> C3500 HD 8.1 G, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Automatic Transmission Diagnosis - 4L80-E (Diesel)) >> Removal & Installation >> Powertrain Control Module >> Removal

Powertrain Control Module: Removal

WARNING: This page is about a different car, the 2002 GMC Cab & Chassis Sierra and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the PCM from the passenger compartment behind the glove box. See Figure .
  3. Disconnect the harness connectors from the PCM.
    4. CAUTION: To prevent possible electrostatic discharge to the PCM, do not touch the component leads, and do not remove the integrated circuit from the carrier.
  4. Remove the PCM mounting hardware.
scientia non olet · About LEMON Manuals