LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> C3500 HD 8.1 G, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1688 (Disc Brakes (Except Cab & Chassis, & Hd)) >> Repair Instructions >> Rear Brake Backing Plate Replacement (15 Series W/NYS - 4-Wheel Steering) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution 
  1. Release the park brake
  2. Raise and support the vehicle
  3. Remove the tire and wheel assembly
    4. Fig 1: Equalizer Bar & Park Brake Cable - Rear
    GM791349
  4. Relieve the tension from the park brake cable by pulling down on the intermediate cable then release the cable from the equalizer bar
    5. Fig 2: Identifying Rear Park Brake Bracket Bolt
    GM791353
  5. Remove the rear park brake bracket bolt
    6. Fig 3: View Of Park Brake Cable To Park Brake Actuator Lever
    GM791352
  6. Remove the park brake cable from the park brake actuator lever
  7. Remove the wheel bearing. Refer to WHEEL HUB & BEARING REPLACEMENT in Rear Wheel Steering
  8. Remove the park brake shoe
  9. Remove the park brake actuator lever housing from the backing plate
  10. Remove the backing plate
scientia non olet · About LEMON Manuals