Shift Control Cable Adjustment

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Position the shift lever in NEUTRAL.

Fig 1: Shift Control Cable Adjustment Lock Cover Retaining Tab

GM1878487

Courtesy of GENERAL MOTORS CORP.

Release the shift control cable adjustment lock cover retaining tab (1).

Fig 2: Shift Control Cable Adjustment Lock Cover

GM1878488

Courtesy of GENERAL MOTORS CORP.

Slide the shift control cable adjustment lock cover (1) back exposing the adjustment lock.

Fig 3: Shift Control Cable Adjustment Lock

GM1878489

Courtesy of GENERAL MOTORS CORP.

Lift the shift control cable adjustment lock (1).
The shift control cable (2) and cable end (3) are free to slide to proper adjustment. Ensure the shift lever and transmission are both in the NEUTRAL position.
Depress the shift control cable adjustment lock (1) to lock the cable adjustment.

Fig 4: Shift Control Cable Adjustment Lock Cover

GM1878488

Courtesy of GENERAL MOTORS CORP.

Slide the shift control cable adjustment lock cover (1) over the adjustment lock.

Fig 5: Shift Control Cable Adjustment Lock Cover Retaining Tab

GM1878487

Courtesy of GENERAL MOTORS CORP.

Ensure the shift control cable adjustment lock cover (1) is securely latched on the adjustment lock.
Inspect the operation of the starting system with the shift lever in each position. The engine should only crank when the lever is in the PARK or NEUTRAL position.