LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> C3500 HD 8.1 G, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1580 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> On-Vehicle Repair Instructions >> Floor Shift Control Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Shift Cable Retainers
    GM1869726Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the range select cable (2) from the range select lever (1).
  2. Release the range select cable retaining clip (3) and remove the cable from the range select cable bracket (4).
  3. Remove the front floor console extension panel. Refer to Front Floor Console Extension Panel Replacement .
  4. Fig 2: Range Select Cable
    GM1869725Courtesy of GENERAL MOTORS CORP.
  5. Remove the range select cable (2) from the automatic transmission range select lever pin.
  6. Remove the range select cable (1) from the automatic transmission range select lever housing.
  7. Fig 3: Range Select Cable Grommet
    GM1869723Courtesy of GENERAL MOTORS CORP.
  8. Remove the range select cable grommet (1) from the cowl.
  9. Remove the range select cable from the vehicle.