LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Shift Cable (Floor Shift) >> Removal

Shift Cable (Floor Shift): Removal

  1. Apply parking brake and block wheels. Remove the left front mat and carpet as necessary. Remove the console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article in AUTOMATIC TRANSMISSIONS.
  2. Ensure the transmission is in the mechanical Neutral position. Remove the retainer securing the shift cable to the shift controller. See Figure.
  3. Remove the tape and grommet on the shift cable from the floor panel. See Figure.
  4. Raise and support the vehicle. Remove the retainer from the shift cable and transmission bracket. See Figure. Remove the shift cable end from the gearshift lever stud ball. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals