Conditions For Running DTC P0756

DTC will run under the following conditions:

• DTCs P0122, P0123, P0502, P0503, P0740, P0742, P0753, P0758, P0785, P1810, P1860 and P1870 are not present.
• System voltage is 8-18 volts.
• Engine speed is greater than 450 RPM for 5 seconds.
• Engine is not in fuel cutoff mode.
• Engine torque is 50-400 ft. lbs.
• TP sensor angle is greater than 9 percent.
• Vehicle speed is greater than 5 MPH.
• Gear range is "D4", "D3", "D2" or "D1".
• Transmission fluid temperature is 68-266°F (20-130°C).
• Transmission output speed is greater than 150 RPM.