Conditions For Running DTC P0752
DTC will run under the following conditions:
- DTCs P0122, P0123, P0502, P0503, P0740, P0742, P0753, P0758, P0785, P1120, P1220, P1810, P1860 and P1870 are not present.
- Engine speed is greater than 450 RPM for 5 seconds.
- Engine is not in fuel cutoff mode.
- Gear range is "D4", "D3", "D2" or "D1".
- TP sensor angle is greater than 9 percent.
- Transmission fluid temperature is 68-266°F (20-130°C).
- System voltage is 8-18 volts.
- Transmission output speed is greater than 150 RPM.