Conditions For Running DTC P0742
DTC will run under the following conditions:
- DTCs P0107, P0108, P0122, P0123, P0502, P0503, P0740, P1810 and P1860 are not present.
- Throttle position is 15-60 percent.
- Engine speed is greater than 300-450 RPM for 5 seconds.
- Engine is not in fuel cutoff mode.
- Engine torque is 40-400 ft. lbs.
- Engine vacuum is 0-105 kPa.
- Engine speed is 1000-3500 RPM.
- Speed ratio is .65-1.70.
- Commanded gear is not 1st.
- Gear range is "D4".
- Gear range does not change in 6 seconds.
- TCC is commanded off.