LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Diagnosis - 4L60-E >> Description & Operation >> Limp-In Mode

Limp-In Mode

If sensor input signals are missing or inadequate for transmission operation, PCM will output preset operating signals to transmission. This mode will keep vehicle operational and allow it to be driven with reduced transmission function and performance until a repair facility is reached. Malfunction Indicator Light (MIL) may illuminate if malfunction occurs. Vehicle should not be driven for extended periods in limp-in mode.

NOTE: Malfunction Indicator Light (MIL) located on instrument cluster is also referred to as SERVICE ENGINE SOON light.
scientia non olet · About LEMON Manuals