LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires & Wheels >> Repair Instructions >> Tire and Wheel Removal and Installation >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle with safety stands. Refer to LIFTING & JACKING THE VEHICLE in General Information.
  2. Remove the wheel hub cap, if equipped.
  3. Remove the wheel nuts. Mark the location of the tire and wheel assembly to the hub assembly.
  4. Remove the tire and wheel assembly.
  5. Clean the wheel nuts, studs, and the wheel and rotor mounting surfaces.
    Fig 1: Removing Tire And Wheel Assembly
    G01670578Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals