LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires & Wheels >> Diagnostic Information and Procedures >> Tire Diagnosis - Irregular or Premature Wear >> Inspection Procedure

Inspection Procedure

  1. Inspect the front tire wear.
  2. Inspect the rear tire wear.
  3. Rotate the tires if any of the following conditions exist:
    • The amount of time or mileage since the last tire rotation matches the maintenance schedule.
    • The outer tread blocks are worn more than the middle tread blocks (1).
    • The outer tread blocks are worn more than the inner tread blocks (2).
    • The middle tread blocks are worn more than the outer tread blocks (4).
  4. Measure the wheel alignment if any of the following conditions exist:
    • The tread blocks have feathered edges (3).
    • The outer tread blocks are worn more than the inner tread blocks (2).
    • The inner tread blocks are worn more than the outer tread blocks (2).
  5. Inspect the struts or the shock absorbers if the tire tread exhibits a cupped appearance (3).
scientia non olet · About LEMON Manuals