LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Removal & Installation >> Stabilizer Bar Link (Pickup & 4-Door Utility) >> Installation

Stabilizer Bar Link (Pickup & 4-Door Utility): Installation

  1. Install the stabilizer bar. See Figure.
  2. Install the stabilizer bar link lower mounting bolt.
  3. Install the stabilizer bar link upper mounting bolt. See Figure.
  4. Install the stabilizer bar link mounting nuts; Then tighten the stabilizer bar link lower and upper mounting nuts. See TORQUE SPECIFICATIONS .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals