LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Removal & Installation >> Stabilizer Bar Link (2-Door Utility) >> Removal

Stabilizer Bar Link (2-Door Utility): Removal

  1. Raise and support the vehicle.
  2. Remove the stabilizer bar link upper mounting bolt and nut. See Figure.
  3. Remove the stabilizer bar link lower mounting nut.
  4. Remove the stabilizer bar link.