LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Removal & Installation >> Stabilizer Bar Link (2-Door Utility) >> Installation

Stabilizer Bar Link (2-Door Utility): Installation

  1. Install the stabilizer bar link. See Figure.
  2. Install stabilizer bar link lower mounting nut.
  3. Install stabilizer bar link upper mounting bolt and nut.
  4. Tighten the stabilizer bar link lower and upper mounting nuts. See TORQUE SPECIFICATIONS 
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals