LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Removal & Installation >> Stabilizer Bar (4-Door Utility) >> Removal

Stabilizer Bar (4-Door Utility): Removal

  1. Raise and support the vehicle.
  2. Remove the stabilizer bar links lower retaining bolts and nuts. See Figure.
  3. Remove the stabilizer bar bracket mounting nuts from the U-bolts. See Figure.
  4. Remove the stabilizer bar brackets.
  5. Remove the stabilizer bar.
  6. Remove the stabilizer bar insulators.
scientia non olet · About LEMON Manuals