LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Removal & Installation >> Stabilizer Bar (4-Door Utility) >> Installation

Stabilizer Bar (4-Door Utility): Installation

  1. Install the stabilizer bar insulators. See Figure.
  2. Install the stabilizer bar to the rear axle.
  3. Install the stabilizer bar brackets.
  4. Install the stabilizer bar bracket mounting nuts to the U-bolts; Then tighten the nut. See TORQUE SPECIFICATIONS .
  5. Install the stabilizer bar to the link retaining bolt. See Figure.
  6. Install the stabilizer bar link retaining nut; Then tighten the nut.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals