LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Upper Control Arm Bushings Replacement (4WD) >> Removal Procedure

Removal Procedure

  1. Remove the upper control arm. Refer to Upper Control Arm Replacement (RWD)  or Upper Control Arm Replacement (4WD) .
  2. Install the upper control arm in a vise.
  3. Remove the upper control arm bushings using J 21474-01  .
    Fig 1: Removing Upper Control Arm Bushings Using J 21474-01 (RWD)
    G01670449Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals