LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Upper Control Arm Bushings Replacement (4WD) >> Installation Procedure

Installation Procedure

  1. Install the upper control arm bushings using J 21474-01  .
  2. Remove the upper control arm from the vise.
  3. Install the upper control arm. Refer to Upper Control Arm Replacement (RWD)  or Upper Control Arm Replacement (4WD) .
    Fig 1: Installing Upper Control Arm Bushings Using J 21474-01 (RWD)
    G01670450Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals