Automatic Transmission Shift Lock Control - Disassemble - Off Vehicle (Column Shift)
CAUTION:
Refer to SIR CAUTION
.
- Disable the inflatable restraint steering wheel module. Refer to DISABLING SYSTEM
.
Important: The abrasion sleeve located on the steering column wire harness assembly must be reinstalled. Make note of what connector, electronic lock module assembly, is coming out of the middle of the abrasion sleeve for installation purposes.
- Put the shift lever clevis into the neutral position.
- Use a small screwdriver to pry the automatic transmission shift lock control away from the steering column jacket assembly and the cable shift cam assembly.