LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Steering Linkage Shield Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle with safety stands. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the steering linkage shield bolts and the washers.
  3. Remove the steering linkage shield.
    Fig 1: Removing Steering Linkage Shield, Bolts & Washers
    G01669994Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals