LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pressure Hose Replacement (2.2L) >> Removal Procedure

Removal Procedure

NOTE: Refer to POWER STEERING HOSE DISCONNECTED NOTICE .
  1. Remove the air cleaner assembly.
  2. Install a drain pan under the vehicle.
  3. Disconnect the power steering gear pressure hose from the power steering pump.
    Fig 1: Disconnecting Power Steering Gear Pressure Hose From Pump (2.2L)
    G01669899Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the power steering gear pressure hose from the power steering gear.
  5. Remove the power steering gear pressure hose from the vehicle.
    Fig 2: Disconnecting Power Steering Gear Pressure Hose From Gear (2.2L)
    G01669900Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals