Activating System (Cavalier & Sunfire)
- Make sure AIR BAG fuse is not installed and key is out of ignition switch.
- Connect passenger air bag 2-pin Yellow SIR connector near base of windshield. Install CPA clip. Connect driver air bag 2-pin Yellow SIR connector at base of steering column. Install CPA clip. Install instrument panel trim pad in reverse order of removal procedure.
- Install AIR BAG fuse in fuse block. Staying well away from inflator modules, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.