Diagnostic Procedure
- If SIR diagnostic system check has been performed, go to next step. If SIR diagnostic system check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
- Turn ignition off. If air bags have deployed, go to step 5. If air bags have not deployed, go to next step.
- Inspect front of vehicle and undercarriage for signs of impact. If impact has occurred, go to step 5. If no impact has occurred, go to next step.
- Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION. Go to step 6.
- Replace components and perform inspections as required following an accident. See POST-COLLISION INSPECTION .
- Reconnect all SIR components. Ensure that all components are properly mounted. Go to SIR DIAGNOSTIC SYSTEM CHECK .